The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
The optional WD-2 water detector allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water...
The BM-1 waterproof box is designed to protect the TrolMaster TS-1/2, HS-1 and ARS-1 controllers from water drops and low-pressure water spray.Package contents: 1 x waterproof box (BM-1)
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical...
The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides a simple and efficient method to control up to 6 valves each with individual timer settings. Up to 5...
The AMP-3 sensor board can be used as a bridge between the sensors (pH sensor and EC/Temp sensor) and the Aqua-X Pro controller.It is specially designed for the Aqua-X Pro system. It can be connected...
The AMP-2 connects the Aqua-x to a set of precision pH / EC and temperature probes to continuously measure the pH / EC and temperature of the water to be sampled. The AMP-2 works with the TrolMaster...
3-in-1 temperature / humidity / light sensor for the Hydro-X system. Sensors must remain dry and clean to avoid premature failure. Do not spray foreign substances or leave water or condensation on...
The TrolMaster MBS-GH 4-in-1 Sensor is a state-of-the-art environmental sensor designed specifically for climate monitoring in professional greenhouses. This compact and precise device integrates...
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) and photocell sensor to create the perfect all-in-one environmental sensor. It is designed for the Hydro-X Pro...
The optional CO2 sensor (MBS-S8) measures CO2 PPM within the cultivation area. Using MBS-S8 allows users to connect and control their own supplementary CO2 system using Hydro-X. Used in combination...
Monitoring the growing medium for proper water content and EC is an important factor in high-yield cultivation applications. TrolMaster understands that today's method of 'crop direction' involves...
The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture / water content level is displayed in real time on the WCS module itself,...
The TSS-2 extension cable is simply a 4.8m extension cable for use with WD-1 water detectors. It has a male and female end and can extend the distance between 2 sensors (or the distance between the...
The WD-1 water detector can be used in two ways. First, it can be used to simply monitor the floor or a water space as a leak detector.The other way in which the WC-1 can be used is as a water...
The optional smoke detector (MBS-SD) can alert the user of smoke within their cultivation area at any time. Up to 5 smoke detectors can be connected to a single Hydro-X controller. If a smoke...
The optional WD-2 water detector allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water...
The BM-1 waterproof box is designed to protect the TrolMaster TS-1/2, HS-1 and ARS-1 controllers from water drops and low-pressure water spray.Package contents: 1 x waterproof box (BM-1)
The OM-8 dry contact board allows the main controller to control up to 8 individual outputs on it. It is specially designed for the Hydro-X Pro and Aqua-X Pro system. It has 8 individual electrical...
The OA6-24 control board is designed to control multiple 24vac solenoid valves. It provides a simple and efficient method to control up to 6 valves each with individual timer settings. Up to 5...
The AMP-3 sensor board can be used as a bridge between the sensors (pH sensor and EC/Temp sensor) and the Aqua-X Pro controller.It is specially designed for the Aqua-X Pro system. It can be connected...
The AMP-2 connects the Aqua-x to a set of precision pH / EC and temperature probes to continuously measure the pH / EC and temperature of the water to be sampled. The AMP-2 works with the TrolMaster...
3-in-1 temperature / humidity / light sensor for the Hydro-X system. Sensors must remain dry and clean to avoid premature failure. Do not spray foreign substances or leave water or condensation on...
The TrolMaster MBS-GH 4-in-1 Sensor is a state-of-the-art environmental sensor designed specifically for climate monitoring in professional greenhouses. This compact and precise device integrates...
The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) and photocell sensor to create the perfect all-in-one environmental sensor. It is designed for the Hydro-X Pro...
The optional CO2 sensor (MBS-S8) measures CO2 PPM within the cultivation area. Using MBS-S8 allows users to connect and control their own supplementary CO2 system using Hydro-X. Used in combination...
Monitoring the growing medium for proper water content and EC is an important factor in high-yield cultivation applications. TrolMaster understands that today's method of 'crop direction' involves...
The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture / water content level is displayed in real time on the WCS module itself,...